[VM CARTRIDGE] audio-technica/VM type Cartridge/AT150MLX

This product is checked by the manufacture before shipment.
Please note that cancellation and return won't be possible after you order this product.
[Gold-plated boron cantilever] Its tiny, gold-plated boron cantilever provides an extremely rigid yet lightweight platform to which the stylus is mounted. Interestingly, the gold plating acts to damp what little resonance the boron may produce.

[MicroLine Stylus] The stylus used is of the latest and most advanced design: the MicroLine stylus. More closely resembling the cutter stylus than any previous design, this shape produces better high frequency response with less wear or distortion than with earlier configurations.

[PCOCC Wire] A technologically advanced pure copper material is used in Audio-Technica' s exclusive Para-toro dal Signal Generator . Together with the laminated core structure, which minimises loss in the high frequency region, this integrated para-toro dal generator system operates at an efficiency significantly greater than conventional cartridges. The use of PCOCC wire (Pure Copper by Ohno Continuous Casting) perfects the performance of the advanced para-toro dal coil design. A special high-temperature extrusion die produces copper with virtually no transverse crystal barriers to impede signal transmission or colour sound. Thus, the coils of the AT150MLX transmit distortion-free sound in which even the most subtle details are reproduced with clarity and purity.

A mu-metal shielding plate between the left and right channels in the generator system assure that the high level of channel separation achieved is preserved at the cartridge output. To further increase the accuracy of the AT150MLX' s moving system, Audio-Technica engineers have ensured against unwanted parasitic vibration with an anti-resonance ceramic mounting base.

As a final attention to detail, even the output terminals are constructed of PCOCC copper. This meticulous care and attention given to every minute detail in both the vibration and generator systems has resulted in a significant improvement in the performance and sound quality. This superb cartridge offers audiophiles and other serious listeners added musical enjoyment. [Type] VM Dual Magnet [Frequency Response] 10 to 30,000 Hz [Channel Separation] 30 dB (1 kHz) [Channel Balance] 0.8 dB (1 kHz) [Vertical Tracking Angle] 23 degrees [Recommended Load Impedance] 47,000 W [Coil Inductance] 360 mH (1 kHz) [Static Compliance] 40 x 10 6 cm / dyne (100 Hz) [Dynamic Compliance] 10 x 10 6 cm / dyne (100 Hz) [Stylus Shape] MicroLine [Cantilever] Gold-plated solid boron [Stylus Construction] Nude Square Shank [Mount] 1/2 centers [Dimensions] 17.3 (H) x 17.0 (W) x 28.2 (L) mm [Accessories] Non magnetic screw driver; Anti-static stylus brush; Two 8 mm installation screws; Two 5 mm installation screws; Two hexagonal nuts; Two round nuts; Four washers; One set of PCOCC Lead Wires (AT6101)

揺るぎないリファレンス、VM CARTRIDGE世界で絶賛されたVM型AT100シリーズ。伝統の音をさらにクオリティアップ。 【商品仕様・説明】 ● 金蒸着ボロンムク・テーパード・カンチレバーとML(マイクロリニア)スタイラスの広帯域VM振動系。 ● PCOCCの高効率伝送にマッチするラミネートコアの低磁気損失パラトロイダル発電系。 ● 当社独自の“カッターヘッドと相似形"動作のVM型で重低音まで忠実再生。 ● コイル、付属リード線の電気信号経路にPCOCC材を採用。 ● 左右独立マグネットのワイドセパレーションをフルに生かすセンターシールド・プレート。 ● 硬剛質ハウジングにより、ボディの剛体化を追求。 ● テクニカルデータ 再生周波数範囲:10~23000Hz 出力電圧:4mV(1kHz、5cm/sec.) チャンネル・セパレーション:30dB(1kHz) 出力バランス:0.8dB(1kHz) 針圧:0.75~1.75g(1.25g標準) コイル・インピーダンス:2.3kΩ(1kHz) コイル・インダクタンス:350mH(1kHz) コイル直流抵抗:530Ω 負荷抵抗:47kΩ 負荷容量:100~200pF スタチック・コンプライアンス:40×10-6cm/dyne ダイナミック・コンプライアンス:10×10-6cm/dyne(100Hz) 針先形状:マイクロリニア(ML) 垂直トラッキング角:23° 外形寸法:H28.2×W17.0×D17.3mm 質量:8.3g (改良などのため予告なく変更することがあります。)